Universal input 100 to 240 VAC
Single, dual, and triple output options
Over voltage protection
Over current protection
Short circuit protection
100% Hi-Pot tested
100% cycling burnt-in

Load regulation: 5%
Maximum power: 60W for convection cooled
Efficiency: 70% typical at full load, varies with distribution of loads among outputs
Transient response: Main output 50-100% load and output regulation meet spec.
Over voltage protection: Pulsing mode, Auto recovery
Over current protection: Pulsing mode, Auto recovery
Short circuit protection: Pulsing mode, Auto recovery

Input voltage: 90 to 264 VAC
Input frequency: 47 to 63 Hz
Input current: 1.4A max at 90 VAC
Inrush current: 50 A max. for two cycles or less
Protection: 2 A fuse on board
Configuration: 3P-2 Molex or equivalent

Topology: FLYBACK
Dielectric strength test: 2.5K VDC primary to secondary
Insulation resistance: 50M Ohm @ 500 VDC primary to secondary
Leakage current: Less than 0.25 mA @ 240 VAC 50 Hz
MTBF: 50,000 hrs min. at full load and 25°C

Conducted / radiated emissions: 

Operating temperature, full load, no derating: 0~50°C
Non-operating: -20~85°C
Relative humidity non-condensing: 0~95%
Altitude: Sea level up to 25,000 feet
Cooling: Convection cooled
Shock: Per MIL-STD-810C 516 Part V
Vibration: 10 to 500 Hz, 15 mins / cycle / axis